Metrodata PacketLINK, Руководство пользователя

Страница: 9 / 27

PacketLINK User Manual
9
Open terminal (115200,8,N,1) and power on the PacketLINK device. The unit takes about a half
minute to boot up and display the password prompt.
Password: admin , logs you in as a basic user
CLI> passwd
Enter Password: gciadmin , logs you in as an administrator which is required for most
configuration changes
2-9-2 CO unit TCP/IP Configuration
The following commands clear and display the CO unit TCP/IP configuration
CLI>gci
====== CLI: Initial ======
GetMAC: Name=eth0, MAC=00:02:AB:A8:01:0B FA=1.
GetMAC: Name=eth0, MAC=00:02:AB:A8:01:0B FA=1.
GetMAC: Name=eth1, MAC=00:02:AB:10:01:01 FA=1.
GetSrcMAC: Name=eth1, MAC=00:02:AB:10:01:01, FA=1.
GetRoute: Name=eth1, Dst=0 Gw=172.16.1.2 F=3.
Initial MW_OS ...
===== Initial All_Chips from here =====
===== Reset CESOP(2) Data Struct.
Base=x30000000, ChipId=x75 x81 x60 xA1.
Return CESOP Type=22
--> Found ‘CESOP-E1’ at Addr=0x30000000.
==> Init ‘CESOP-E1’ at Addr=0x30000000.
===== Initial All_Chips done here =====
GetMAC: Name=eth1, MAC=00:02:AB:10:01:01 FA=1.
GetSrcMAC: Name=eth1, MAC=00:02:AB:10:01:01, FA=1.
GetRoute: Name=eth1, Dst=0 Gw=172.16.1.2 F=3.
Init FM OK !
Init ISR OK !
Init PM OK !
Init FM Notification=x100131A8.
Hist_SemMT=x1011BECC already Created.
HAC_MsgId=x8001 already Created.
HAC_Task=x1005 already Created.
CLI>cdisp
====== CLI: CFG Display ======
====== Config: IP Addr = 192.168.1.11
====== Config: Net Mask = 255.255.255.0
====== Config: GW Addr = 172.16.1.2
====== Config: Trap EN = 0. (Disable)
====== Config: Trap IP = .
====== Config: NTP EN = 0. (Disable)
====== Config: NTP IP = .
====== Config: CESoPSN-IP (16-Ports) ======