Rotate Counter
Clockwise to
Remove Knob
(x2)
Remove Rail
for Cleaning
PrepMate Sitting Fully Accessorised Cart Assembly Instructions
PrepMate Rail Cleaning:
Rotate Clockwise to
Tighten Knob
(x2)
CLEANING INSTRUCTIONS
A) Rails should be cleaned and sanitized after each use.
Remove End Cap
for Cleaning
(x2)
Place Rail on End Caps
Place End Cap on Post
with Metro Logo Outward
(x2)
Threaded Stud Goes
Through Hole of End
Cap
(x2)
Base Cleaning:
A) Clean and Sanitize using a 4-Step Process:
1) Clean
2) Rinse
3) Sanitize
4) Air Dry
B) Super Erecta Pro Polymer Mats can be
removed for cleaning in dishwasher or sink.
C) Always ensure cleaning and sanitizing products are recommended for use on plastics, epoxy
coated, stainless, plated, and galvanized steel. Avoid using abrasive cleaners, harsh chemicals, stiff
brushes, and scouring pads as these will void the warranty.
1
2
3
4
5
D)The entire unit may be rinsed with a hose or low pressure power washer. Intermittent exposure is
limited to 200°F (93°C). Please note: This product is NOT to be used with an automated high
temperature cart washing system of autoclave.
B) Rails can be taken apart for periodic deep cleaning in a dishwasher or sink.
WORK SURFACE EXTENSION
Rotate Thumb
Nut Clockwise
DROP-IN EXTENSION
Rotate Thumb
Nut Clockwise
PrepMate Fully Accessories Assembled
www.metro.com
INSTR-CNB-TMKIT
* Save this document for future reference.
US/Can: 1.800.992.1776
Corporate Headquarters (US): 1.570.825.2741
For Inquiries Outside of the U.S. and Canada, Visit www.metro.com/contactus