- Card ID: OK = no change; 0 = none or swipe card.
- Enter PIN number to coincide with new User Code or Press OK to skip.
- Press OK to accept new User Code / PIN number.
- Enter User Name or Press OK to skip.
- Press OK to accept User name.
- "OPERATOR ID WAS ASSIGNED" should display on screen.
- Press OK to continue.
- Press "SIGN OUT" to exit Supervisor Mode.
Only for carts that are equipped with a Controlled Substance
drawer. The factory default code is 7777 with 1234 as the PIN. Both
must be changed before narcotics are placed in the drawer.
- Press OK to wake up touch pad.
- Enter Supervisor Code & Press OK.
- Press "FUNCTION" key several times until "ASSIGN A NEW CS
CODE" is displayed & Press OK.
- Enter New 4-digit CS Code & Press OK.
- Enter PIN number to coincide with new CS Code or Press OK to skip.
- Press OK to accept new CS Code / PIN number or "CLEAR" to
change.
- Enter CS Name or Press OK to skip.
- Press OK to accept User name or "CLEAR" to change.
- "THE CS CODE WAS ASSIGNED" should display on screen.
- Press OK to continue.
- Press "SIGN OUT" to exit Supervisor Mode.
Only the 4-digit CS Code has to be entered to delete the user; if
User added PIN, it is not necessary for Supervisor to know the PIN to
Delete the User.
- Press OK to wake up touch pad.
- Enter Supervisor Code.
- Press "FUNCTION" key several times until "DELETE CS CODE" is
displayed & Press OK.
- Enter 4-digit CS Code to be deleted & Press OK.
- Press OK again to delete CS Code.
- Press "SIGN OUT" to exit Supervisor Mode.
Cannot change CS Code itself but can edit information tied to
CS Code (i.e., PIN, Name); to change CS Code, must Delete existing
code & Add new code.
- Press OK key to wake up touch pad.
- Enter CS Code & Press OK.
- Press "FUNCTION" key several times until "EDIT CS CODE" is
displayed & Press OK.
- Enter the CS Code to be edited.
- Press OK to change the User PIN or Press "SELECT" to skip.
- Press OK to change the current CS Name or Press "SELECT" to skip.
- The CS ID was updated will display on screen.
- Press OK to continue.
- Press "SIGN OUT" to exit Supervisor Mode.
The cart includes an adjustable time-out period controlled by a motion
sensor. While motion is sensed the time out is inactive. When no
motion is sensed the time-out countdown begins. Several seconds
before the time-out period elapses, an audible tone will sound 5 times
then the cart will automatically relock. Any motion (or pressing any
key) before the fifth tone will reset the time-out period. The factory
time-out default setting is 5 minutes.
The cart time-out can be set in seconds (10 to 99) or minutes (1
to 999). To set time in seconds, enter a leading "0" in front of the
number (e.g. 015 = 15 seconds). To set time in minutes, do not enter a
leading "0" (e.g. 15 = 15 minutes).
Add New Controlled Substance Code:
Delete Existing Controlled Substance Code:
Edit Existing Controlled Substance Code:
Set Auto Lock Timer - Cart:
Note:
Note:
Note:
Note:
- Press OK key to wake up touch pad.
- Enter Supervisor Code and press OK.
- Press the "FUNCTION" key several times until "SET THE CART
TIME OUT" displays.
- Press OK. The current time-out setting will display.
- Press OK to change the setting.
- Enter a new time-out (for seconds, use a leading "0").
- Press OK.
- Press the "SIGN OUT" key exit Supervisor Mode.
Only for carts that are equipped with a Controlled Substance
drawer.
The CS drawer has a separate adjustable time-out that begins when
the drawer is unlocked but not pulled open. The time-out is disabled
when any keyless drawer is pulled out. The countdown resets again as
soon as all keyless drawers are closed. If drawers are closed, several
seconds before the time-out period elapses, five long audible tones will
sound before the drawers relock. A message will display indicating that
the CS drawer is unlocked. Relock the drawer by pressing the CS key.
The CS drawer time-out is set in seconds, 10-999. It is not
necessary to add a leading "0" in front of the number (e.g. 15 = 15
seconds.)
- Press OK key to wake up touch pad.
- Enter Supervisor Code and press OK.
- Press the "FUNCTION" key several times until "SET THE CS TIME
OUT" displays .
- Press OK. The current time-out setting will display.
- Press OK to change the setting.
- Enter a new time-out in seconds (10-999).
- Press OK.
- Press the "SIGN OUT" exit Supervisor Mode.
The date is set as MM/DD/YY and will automatically change at
the beginning of each new calendar year and will add an extra day for
leap years. Time can be entered as standard or military.
- Press OK to wake up touch pad.
- Enter Supervisor Code and press OK.
- Press "FUNCTION" key several times until "SET THE CART DATE" is
displayed.
- Press OK.
- The current date will display.
- Press OK to change the date.
- Enter a new date (MM/DD/YY).
- Press OK to accept or "CLEAR" to change.
- Press "SIGN OUT" to exit Supervisor Mode.
- Press OK to wake up touch pad.
- Enter Supervisor Code and press OK.
- Press "FUNCTION" key several times until "SET THE CART TIME" is
displayed.
- Press OK.
- The current time will display.
- Press OK to change the time.
- Choose either "STANDARD TIME PRESS 1" or "MILITARY TIME
PRESS 9"
- Press OK.
- Enter the new time.
- Press OK to accept or "CLEAR" to change.
- Press "SIGN OUT" to exit Supervisor Mode.
Set Auto Lock Timer - CS Drawer:
Set Cart Date and Time:
Set Cart Date:
Set Cart Time:
Note:
Note:
Note:
FL420
Electronic Locking User Guide - General Operating Instructions
3
