MN100003 REV A (12/07/10)
Page 9
VibraCheck II Quick Guide:
To begin:
1. Press and hold the
on/ off
button for 4 seconds. Press
the on/ off button again to illuminate the display.
2. Connect accelerometer and headphone or optional
thermometer if desired.
3. Select desired test you wish to make;
Disp
lacement,
Vel
ocity or
Accel
eration.
4. You may also choose in addition other functions such as
hold
. This “freezes” the display until the hold is pressed
again.
Gain
will increase the resolution by one decimal
place.
Avg./ PK
(
peak
) allows you to select either Average
or Peak. Selecting Average will slow the display by only
displaying average of the last 10 readings. Peak displays
only the highest peak value.
BRG (bearing)
is a high
pass fi lter that fi lters values below 500 Hz. This means
that you will not see anything on the display below 500
Hz bandwidth.*
Note:
Hold, Gain, Avg/ Pk, and BRG are used with the
test mode selected: disp, vel, or accel.
