METREL MI 2014, Инструкция по эксплуатации

Страница: 26 / 32

MI 2014 Cable Scanner Section III Cable Scanner operation
26
13 Locators – Identification of cables
Test procedure
Locators are used for finding the correct cable connector in wiring closets, patch panels
etc. In this mode the instrument decodes which identificator is connected to the far
cable end.
28 simple Locators are available for fast and simple cable identification.
1. Select Locator function with the rotary
switch.
2. Connect the coded (the code is printed
on the locator) locators in far cable end
sockets.
On the display the code of the locator on the
far cable end is shown.
Locator 13 connected at the other cable side
#1 #2 #3 #16
Typical Cable Scanner connections in Locators Test
Important
The Standard Remotes and Talk Remote can’t be used instead of Locators.