MI 3143 Euro Z 440 V
Communication
22
7
Communication
There are two communication interfaces available on the Euro Z instrument for communication
with master instrument or Android device: RS-232 and Bluetooth.
RS-232 communication
Serial interface cable is required. See following figures for correct connection.
Figure 7.1: RS-232 connection
– (Example of connection with MI 3152 or MI 3155
Figure 7.2: RS-232 connection (Example of connection to master instrument with standard 9-
pin D-SUB type serial port)
Bluetooth communication
The internal Bluetooth module enables easy communication via Bluetooth with PC and Android
devices.
How to configure a Bluetooth link between Euro Z instrument and Android device
Switch On the Euro Z instrument.
Some Android applications automatically carry out the setup of a Bluetooth connection.
It is preferred to use this option if it exists. This option is supported by Metrel's Android
applications.
If this option is not supported by the selected Android application then configure a
Bluetooth link via Android device’s Bluetooth configuration tool. Usually no code for
pairing the devices is needed.
The instrument and Android device are ready to communicate.
Notes
Sometimes there will be a demand from the PC or Android device to enter the code.
Enter code ‘
1234
’ to configure the Bluetooth link correctly.
The name of correctly configured Bluetooth device must consist of the instrument type
plus serial number, e.g. MI 3143-12345678I. If the Bluetooth module got another name,
the configuration must be repeated.
