A 1398 PQA Iron Current Clamp
Safety and operational considerations
6
Markings on the A 1398 PQA:
Symbol
Description
Read the Instruction manual with special care to safety operation«.
The symbol requires an action!
Do not apply around or remove from HAZARDOUS LIVE conductors.
Mark on your equipment certifies that it meets requirements of all
subjected EU regulations.
This equipment should be recycled as electronic waste.
Standards applied
The A 1398 PQA Iron Current Clamp is manufactured and tested in accordance with the following
regulations:
Electromagnetic compatibility (EMC)
EN 61326 - 1
Electrical equipment for measurement, control and laboratory use
– EMC requirements – Part 1: General requirements
EN 61326 - 2 - 2
Electrical equipment for measurement, control and laboratory use
– EMC requirements – Part 2-2: Particular requirements - Test
configurations, operational conditions and performance criteria for
portable test, measuring and monitoring equipment used in low-
voltage distribution systems
Safety (LVD)
EN 61010 - 1
Safety requirements for electrical equipment for measurement,
control and laboratory use
– Part 1: General requirements
EN 61010 - 2 - 032
Safety requirements for electrical equipment for measurement,
control and laboratory use
– Part 2-032: Particular requirements for
hand-held and hand-manipulated current sensors for electrical test
and measurement
Note about EN and IEC standards:
❑
Text of this manual contains references to European standards. All standards of EN
6XXXX (e.g. EN 61010) series are equivalent to IEC standards with the same number
(e.g. IEC 61010) and differ only in amended parts required by European harmonization
procedure.
