1
Multi-Function Heat Pump
I. Introduction
1.1.This manual contains the necessary information of correct installation, commissioning, use
and maintenance of machinery.
1.2.In order to use this product better and more safety, please read this instruction carefully before
install and use, and focus on the installation, use and maintenance of all considerations, taking
into safekeeping for when required.
1.3.Heat pump is a highly specialized appliances, improper installation may cause damage or
danger, so the corresponding installation and maintenance need professionals, users please
contact our company special, commissioned local installation repair services department,
carefully read the installation section, and follow the prompts to install.
1. User Guide
2. Special warning
2.1.Please ask a qualified professional installation company responsible for installing heat
pumps. Installation people should have relevant professional knowledge, when self-
installation, the wrong action will result in fire, electric shock, injury, leakage, and so on.
2.2.When installation, please check the distribution power capacity, switches, sockets whether
according to our heat pump power supply requirements, details please refer to unit nameplate
or technical data sheet on the installation instructions.
2.3.When power connect, the unit must be a reliable ground connection, confirm that the ground
wire is effective. If the ground is imperfect, may result in personal injury.
2.4.Heat pump before testing, hot water side and air-conditioning side of the water system must
be full of water, drain pipes before switch on, test the hot water side and air-conditoning side
water system water pump independently, when normal, turn off the water pump exit test
status, allowed to select the operating mode into the normal state of the unit test run.
2.5.The water above 52
may cause skin burns, tank hot water need mixed with cold water
before use.
2.6.Insert any tool within the heat pump is strictly prohibited, in order not to hit the fan result in unit
damaged or an accident.
2.7.When installation, be sure to install filter in the heat pump inlet, make sure unit inlet water was
clean enough.
2.8.The units have been set parameters well in the factory, non-professionals against
arbitrary adjustments.
2.9.When the unit needs to be moved or re-installation, Please ask a qualified professional
installation company for help.
2.10.Any self-modification or repair is forbidden, if repair not properly, may result in fire, electric
shock, injury and leakage incidents, you should ask agent or professional to repair.
3.Note
3.1.Please confirm that the drainage pipe is smooth outlet, improper piping installation will result
in water leakage, or wet the furniture.
3.2.Confirm whether already install the leakage protection switch, or else may result in electric
shock.
3.3.Prohibiting installed in the position of combustible gas leaks.
3.4.Ensure the installation base, lifting is solid and reliable enough.
