Metra Electronics Saddle Tramp BC-HDR-K3, Руководство по установке

Страница: 8 / 12

8
386.257.1187
|
MetraOnline.com
PROGRAMMING
1
. Turn the ignition on.
2
. Connect the
BC-HDR-K3 harness
to the wiring harness in the bike.
3. For vehicles without hand controls:
The interface will automatically program.
4. For vehicles with hand controls:
Locate the
Volume Up
button on the clutch
side hand control. Program the interface by tapping the
Volume Up
button at a
heartbeat pace until the LED light stops flashing.
5.
The LED light will flash
Green
&
Red
while the interface programs the radio
to the handlebar controls. Once programmed, the LED light will go out, then
produce a pattern which will identify the radio type installed.
6. The LED light will go out, then once again quickly flash Green & Red while
the interface programs itself to the vehicle. Once programmed, the LED light
will go out again, then turn solid
Green .
7.
Turn the ignition off, then back on.
8.
Test all functions of the installation for proper operation.
Green & Red LED
Green or Red LED
Green & Red LED
Green LED
OF
F
A
CC ON STA
RT
OF
F
A
CC ON STA
RT
OF
F
A
CC ON STA
RT
VOL
+
Do Not Touch
VOL
+
Tap Volume Up