4
11.
Secure tube to under the front passenger’s seat.
12.
Using a semi-rigid wire fishing tool, insert the wire tool in the cavity of the center console just in
front of the carpet snap. Fish the cable from the driver side tube across the center console to the
passenger side.
13.
Connect the drivers side LED tube wire, and position and mark the included brackets for the driver
knee bar.
14.
Connect cable, and route under the driver seat using the same process as the passenger side.
15.
Locate passengers side firewall plug, and route the yellow battery wire into this port. (we
recommend liquid soap, or silicon lubricant [Metra PN: IB05074] to pass these wires through the
rubber grommet.)
*This will be seen from the interior of the vehicle. Firewall grommet removed for better view.
