Metra Electronics JP-1014 Скачать руководство пользователя страница 7

Страница: 7 / 8

REV. 12/12/2019 INSTJP-1014

KIT ASSEMBLY

Remove the factory speakers from the

speaker pods. (Figure A)

Remove the grommet and factory

wiring from the speaker pods. (Figure B)

Insert the grommets into the

JP-1014

speaker pods.

(Figure C)

Attach the

speaker harnesses

provided

to the factory harness inside the pods,
and then to the aftermarket speaker.
(Figure D)

Secure the aftermarket speakers to the

pods using hardware supplied with
the speakers.

Reassemble the dash in reverse order

of disassembly. Ensure that the factory
electronic module removed in Dash
Disassembly, step 10, is connected back
to the vehicle.

(Figure A)

(Figure C)

(Figure B)

(Figure D)

Содержание JP-1014

Страница 2: ... 2 Phillips screw exposed Figures A B 2 Unclip unplug and remove the climate control panel Figure C Figure D Figure E 3 Remove 2 Phillips screws securing the radio trim panel then unclip and remove Figure D 4 Remove 1 Phillips screw securing the dash pad then unclip and remove Figure E Figure A Figure B Figure C ...

Страница 3: ... Figure F G 6 Unclip the steering column shroud then set aside Figure H Driver s side speaker removal 7 Open the driver s door then unclip and remove the panel on the side of the dash Remove 5 Phillips screws exposed Figure I 8 Remove 5 Phillips screws securing the speaker panel then unclip and remove Figure J Figure I Figure F Figure G Figure H Figure J ...

Страница 4: ... removing the speaker pod in the next step Figure K L Figure L Figure N Figure M Figure K 10 Remove 3 Phillips screws securing the speaker pod then unclip unplug and remove Gentle aggression will be required to remove the pod Figure M Note There is an electronic module attached to the back of the pod which must be removed and reused in Kit Assembly Figure N ...