10
QUICK SETUP GUIDE
(CONT.)
DSP Setup & Controls (Cont’d)
(Figure 4)
DSP Setup & Controls (Cont’d)
Next Screen will allow you to set your crossover points, filter type, and slope. If you would
like to pass full frequency range to your amps set all filters to High Pass and drag the slider
all the way to the left making sure the entire frequency bar is green. (Figure 4)
• Selecting High Pass and Low Pass will provide one crossover frequency adjustment.
Band Pass should only be chosen if installing just front speakers, with one dedicated
amp for the woofers/mids, a second dedicated amp for the tweeters, along with a
subwoofer.
• If you have a specific frequency you would like, select the number above the slider
and enter in your exact frequency.
• Select the desired crossover slope, 24db, 36db, or 48 db. Higher is steeper.
Continued on the next page
