INST-123KI
®
8
ISO DIN radio provision with pocket
1.
Determine which
trim plate
to use according to the
chart and attach the
brackets
to the
trim plate
. (Figure A)
2.
Slide the
into the bottom opening of the trim
plate/bracket assembly and secure the
using
the included (4) 3/8” Phillips screws. (Figure B)
3.
Remove the metal DIN sleeve and trim ring from the
aftermarket radio.
4.
Slide the radio into the opening above the
and secure using the hardware that came with the
radio. (Figure C)
5.
Locate the factory wiring harness and antenna
connector in the dash. Metra recommends using
the proper mating adapter from Metra or AXXESS.
Test the radio for proper operation.
6.
Reassemble the dash in reverse order of disassembly.
Figure A
Figure B
Figure C
Kit Assembly
