Metra Electronics CS-HDBTLPOER-70, Руководство пользователя

Страница: 20 / 28

17
Hardware Installation
1. Connect an HDMI source (such as a Blu-Ray, games console, media
server etc.) to Transmitter using quality HDMI cables.
2. Connect a good quality, well terminated Cat5e/6 cable of no more than
70m/230ft in length between the HDBaseT output of the Transmitter and
HDBaseT input of Receiver.
Note: 70m/230ft is the maximum recommended transmission distance for this
model and denotes perfect transmission conditions – including straight cable
runs with no electrical interference. If any of the above is a factor in your
installation, transmission range maybe affected.
3. Connect the HDMI display (LED/LCD display or projector) to the HDMI
output of the Receiver
4. Connect IR emitters from the TX ports of Transmitter and Receiver and
firmly attach the IR emitter eye directly over the infrared receiving
sensors of the source and display device to be controlled. Location of the
emitter eye on each device may need to be adjusted later to achieve best
IR performance.
5. Insert IR receivers into IR RX ports of Transmitter and Receiver. Position
of the IR receiver eye on or near the display or source device, ensuring
using a clear line of sight to remote handset used to control it.
6. Connect the power supply to the Transmitter or Receiver and power on
all devices.