Metra Electronics AHDT-01, Руководство по установке

Страница: 13 / 16

12
H
D
R
A
D
IO
BLACK
BLACK
RED
WHITE
R
L
TU
N
E
R
UNP
LUG
EX
IST
ING
EX
IST
ING RE
-PL
UG
FROM CAR
20
W
AY
YELLOW WIRE
TO 12 VOLT
CONSTANT
BLACK WIRE
TO GROUND
WHITE LOOP
PIN 7 TO 17
FROM CAR
FROM CAR
CONNECT TO “ANT IN” IN HD TUNER
MALE TO FEMALE CONNECTOR 6“ MALE TO MALE
EXTENSION CONNECTOR
STEP 3
STEP 5
STEP 7
STEP 8
STEP 17
STEP 18
STEP 19
STEP 16
STEP 15
STEP 11
STEP 4
These wires and loop are not found
on all applications. Check the vehicle
specific harness instructions to see
if they apply to your application.
DIAGRAM “A”
Step 20) Once all connections are made reconnect the negative battery terminal.
Step 21) Cycle the ignition key by turning the car on for 10 seconds, then off, then back on to initialize the AHDI
interface.
Step 22) To test and operate the HD tuner please refer to the AHDH vehicle specific harness instructions. They will
give specific directions on what buttons do what.
Step 23) Reinstall the OEM radio and reassemble the dash once the HD tuner has been tested.
Step 24) Enjoy HD Radio!
AHDT-01