Metra. The World’s Best Kits.
®
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
REV. 3/6/20 INST99-9613WR
I N S TA L L AT I O N I N S T R U C T I O N S
99-9613WR
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
• ISO DIN radio provision with pocket
• ASWC-1 interface in water resistant enclosure included to retain
handlebar audio controls
• 44-UA20 antenna included
KIT COMPONENTS
• A) Radio housing
(with rubber gasket)
• B) (4) 1/2” long button-head cap screws • C) Wiring harness (not shown)
• D) ASWC-1 interface in water resistant enclosure (not shown) • E) 44-UA20 antenna (not shown)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket wrench: (T-25 Torx, T-27 Torx, 1/2”, 3/16 hex)
TABLE OF CONTENTS
Fairing Disassembly
– FLH (batwing fairing) ....................................2-3
– Roadglide (sharknose fairing) .....................4-5
Kit Assembly ..........................................................6
Wiring Instructions ................................................7
ASWC-1 Instructions ...............................................7
Final Assembly .......................................................8
Handlebar Control Settings ...............................8-11
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Included
Antenna: 44-UA20 included
Handlebar controls: ASWC-1 in water resistant
enclosure included
A
B
Harley-Davidson
(FL models with a fairing) (†)
1998-2013
(†) Without factory amp, two speaker systems only
for more detailed information about the product and up-to-date vehicle
specific applications
