99-9605B
7
Kit Assembly
ISO DDIN radio provision
1.
Slide the radio into the
radio
housing
and then secure it using
the screws supplied with the radio.
(Figure A)
2.
Slide the
radio housing
into the
radio frame assembly removed in
dash dissassembly. (Figure B)
3.
Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio and HVAC
controls. Metra recommends using
the proper mating adapter from
Metra and/or AXXESS. Test the
radio for proper operation.
4.
Place the
radio brackets
around
the radio housing assembly and
then secure it using the (2) 8 x 3/8”
Phillips screws provided.
(Figure C)
5.
Reassemble the upper dash in
reverse order of disassembly.
For models
without
factory
navigation:
1.
Secure the HVAC controls into the
lower location of the lower console
using the screws removed in dash
disassembly. (Figure A)
2.
Snap the
climate trim panel with
into the lower console
location. (Figure B)
3.
Reassemble the lower dash in
reverse order of disassembly.
(Figure B)
(Figure A)
(Figure A)
(Figure C)
(Figure B)
