99-8213
4
C
L
I
M
A
T
E
C
O
N
T
R
O
L
W
I
R
I
N
G
When completed be sure to tape up
the wires including the resistor to
protect them from coming into
contact with any metal, and push
the 20 way connector back into
the dash. (see diagram)
4
CLIMATE CONTROL WIRING
Locate the 20 way white connector
that has 5 wires in it that was
plugged into the factory radio.
(see diagram)
1
You will need the small gauge white
wire in pin 10 and the small gauge
pink wire in pin 9. The 3 remaining
larger gauge wires are not needed
at this time. (see diagram)
2
Strip back the white and pink wires,
connect one side of the 68 OHM
resistor to the white wire and
connect the other side of the resistor
to the pink wire (see diagram).
3
For the climate controls to operate properly, the following steps
need to be followed:
