99-7410
INSTALLATION
INSTRUCTIONS
APPLICATIONS
CAR
PAGE
NISSAN
200SX 1995-98........................................................1-3
Sentra 1995-99........................................................1-3
KIT COMPONENTS
TOOLS REQUIRED
Cutting tool
Adjustable wrench
Phillips screwdriver
Spacer
Snap Spacers
Equalizer
Dummy Plate
Radio Housing
KIT FEATURES
Shaft and
DIN unit
provisions
Equalizer
provisions
5
6
Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adaptor and making
connections as shown. (Isolate and
individually tape off the ends of any
unused wires to prevent electrical short
circuit).
Re-connect the battery terminal and test the unit
for proper operation. Mount the head unit/kit
assembly to the sub-dash with (4) Phillips screws
previously removed in step #1.
A
B
C
D
A) Strip wire ends back ½"
B) Twist ends together
C) Solder
D) Tape
4
"A"
"A"
"B"
"B"
Mount the factory cupholder to the bottom of the
Radio Housing
with (2) Phillips screws
previously removed in step #1
("A")
and (2) locating pins
("B").
3
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2001 METRA ELECTRONICS CORPORATION
rev. 250701
