Metra Electronics 99-7376B, Инструкция по установке, Страница: 3 / 4

99-7376B
3
Kit Preparation Kit Assembly
ISO DIN radio provision with pocket
1.
Secure the pocket to the radio
brackets using the (4) #8 x 3/8”
Phillips screws provided. (Figure A)
2. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
3.
Attach the radio to the bracket/
pocket assembly using the screws
supplied with the radio. (Figure B)
4. Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Test the radio for proper
operation.
5.
Secure the assembly into the dash
opening using the factory hardware.
6. Snap the radio trim panel over the
radio/pocket assembly, and then
reassemble the dash in reverse
order of disassembly.
1. Remove the (3) Phillips screws
securing the A/C vents to the radio
trim panel and then remove.
2. Secure the vents onto the radio
trim panel using the factory
hardware.
Please visit Metraonline.com for
kit preparation illustrations.
(Figure B)
(Figure A)