I N S TA L L AT I O N I N S T R U C T I O N S
99-5840CH
Metra. The World’s Best Kits.
®
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
REV. 4/16/19 INST99-5840CH
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Touchscreen display for climate and personalization features
• Painted charcoal
KIT COMPONENTS
• A) Radio trim panel with touchscreen display • B) Radio brackets • C) Pocket • D) Engine start/stop circuit board and cover
• E) (4) #8 x 3/8” Phillips truss-head screws • F) (6) #4 x 1/2” Phillips pan-head screws • G) (4) Panel clips • H) USB cable
• I) HVAC interface and wiring harness (not shown) • J) Antenna adapter (not shown)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 9/32” socket wrench • Cutting tool
• Torx T-10 screwdriver
TABLE OF CONTENTS
Dash Disassembly ...............................................2-3
Kit Preparation ...................................................4-5
Kit Assembly
–ISO DIN radio provision with pocket ..................6
–ISO DDIN radio provision .....................................6
Axxess Interface installation .............................7-15
Final Assembly ...................................................... 11
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Axxess interface built
into touchscreen
Antenna Adapter: Included with kit
A
B
C
E
D
Ford
Mustang
(with 8” touchscreen)
2015-2017
F
G
H
for more detailed information about the product and up-to-date vehicle
specific applications
