background image

99-3308G

7

Final Assembly 

(cont.)

Backup Camera Settings

6.

Chime level adjustment:
a.  With the vehicle on, turn it

off and leave the keys in the

ignition. Open the driver’s door;

chimes will be heard.

b.  Wait 10 seconds, and then with

a small flat-blade screwdriver, 

turn the potentiometer

clockwise to raise the chime

level; counterclockwise to lower

the  chime level.

c.  When the chime is at a desired

level, remove the keys from the

ignition. This will lock the chime

volume at its current level.

7.

Secure the completed assembly

into the dash using the

factory screws.

8.

Attach the 

radio trim panel

 over

the completed assembly, and then

reassemble the dash in reverse

order of disassembly.

From the main OEM screen:

1.

Press the gear icon located in the

bottom right corner to enter the

settings menu.

3.

Press the “Backup Camera

Settings” button to enter the

backup camera settings menu.

4.

If you are using the factory

equipped backup camera, select

“OEM Backup Camera”.

• If you are using an aftermarket

backup camera, select

“Aftermarket Backup Camera”

• If there is no backup camera

present, keep selected

“No Backup Camera”

Note:

 If there is no backup camera

present and this setting is not

changed, the OEM screen will

switch to a black screen while

the vehicle is in reverse.

2.

Press the “Customize” button to

enter the customize menu.

Содержание 99-3308G








Отзывы: