4
99-3107 KIT AND FINAL ASSEMBLY
ISO MOUNT RADIO PROVISION WITH POCKET
Re-connect the negative battery ter-
minal and test the unit for proper
operation.
2
Mount the ISO Brackets to the after-
market radio using the screws sup-
plied with the radio.
(Figure B)
3
Slide the the radio into the radio
opening of the radio housing.
(Figure C)
4
*
Note: Refer also to the instructions included with the aftermarket radio.
Locate the factory wiring harness in
the dash. Use the supplied wire har-
nesses and make the connections as
shown. (Isolate and individually tape
off the ends of any unused wires to
prevent electrical short circuit)
(Figure A)
1
B
A
C
Continued on page 5.
