REV. 1/17/2018 INST99-3022B
3
ISO DIN radio provision with pocket
1.
Secure the
to the
radio brackets
using the (4) #8 x 3/8” Phillips screws
provided. (Figure A)
2.
Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3.
Slide the radio into the bracket/pocket
assembly, and then secure it using the
screws supplied with the radio. (Figure B)
4.
Insert the completed assembly between
the
front radio housing
, and the
rear
radio housing
, then secure the entire
assembly together with the (6) #8 x 3/8”
Phillips screws provided. Then attach the (3)
factory clips removed in Dash Disassembly
onto the assembly. (Figure C)
5.
Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to the
radio. Metra recommends using the proper
mating adapter from Metra and/or Axxess.
Test the radio for proper operation.
6.
Reassemble the dash in reverse order of
disassembly.
KIT ASSEMBLY
(Figure B)
(Figure C)
(Figure A)
