REV. 4/13/2021 INST95-9616B
5
From the 9616 harness to the aftermarket radio, connect the:
•
Black
wire to the ground wire.
•
Yellow
wire to the battery wire
•
Red
wire to the accessory wire.
Note:
There will also be a
Red
wire on the SWC harness to connect as well.
•
Blue
wire to the power antenna wire.
•
Blue/White
wire to the amp turn on wire.
•
Orange
wire to the illumination wire. †
•
Brown
wire to the mute wire. †
•
Blue/Pink
wire to the speed sense wire.
•
Green/Purple
wire to the reverse wire. †
•
Light Green
wire to the parking brake wire. †
•
Yellow
RCA jack to the Yellow RCA jack from the SWC Harness labeled “To Reverse Camera”. ‡
•
Red
&
White
RCA jacks labeled “FRONT LEFT” and “FRONT RIGHT” to the full range front
amplifier output jacks.
•
Red
&
White
RCA jacks labeled “AUX Left” and “AUX Right” to the audio AUX-IN jacks. †
• Disregard the following (8) wires:
Gray, Gray/Black, Green, Green/Black, Purple, Purple/Black, White, White/Black
† If applicable
‡ Mandatory connection to retain parking sensor graphics
From the SWC harness to the aftermarket radio:
• Parrot: Connect the AX-SWC-PARROT (sold separately) to the 3.5mm jack, then to the radio.
•
For the radios listed below:
Connect the 3.5mm adapter to the 3.5mm jack.
•
Eclipse:
Brown - Brown/White/Brown/White - Brown
•
Kenwood/JVC (with SWC wire):
Blue/Yellow - Brown
•
Metra OE:
Key 1 (Gray) - Brown
•
Universal “2 or 3 wire” radio:
Key-A or SWC-1 - Brown/Key-B or SWC-2 - Brown/White
Note:
After programming, assign SWC buttons within menu.
•
XITE:
SWC-2 - Brown
•
For all other radios:
Connect the 3.5mm jack to the radio.
• Connect the
Red
wire to accessory power.
• Connect the
Yellow
RCA jack labeled “To Reverse Camera Input (Radio)”,
to the backup camera input. ‡
‡ Mandatory connection to retain parking sensor graphics
CONNECTIONS
Содержание 95-9616B
Страница 11: ...REV 4 13 2021 INST95 9616B 11...
