95-5817
3
Dash Disassembly
All vehicles
1.
Using the Metra 86-5618 removal keys, slide the
radio out of the radio cavity. Unplug and remove
the radio.
2.
Cut and remove obstructions in dash cavity.
ATTENTION:
Be careful not to cut into harnesses
or electronic components.
Continue to kit assembly
ISO DDIN radio provision
1.
Attach
the
ISO DDIN brackets
to the radio using the
screws supplied with the radio. (Figure A)
2.
Locate the factory wiring harness in the dash. Metra
recommends using the proper mating adapter from
Metra or AXXESS. Test the radio for proper operation.
3.
Slide the completed assembly into the modified sub-
dash until it clicks into place.
4.
Clip
the
filler bar
into the bottom of the radio opening
under the radio assembly with the rounded edges
facing toward the dash. Tip: Hook one side in then
push the other side in until it clips. (Figure B)
Kit Assembly
(Figure A)
(Figure B)
(Figure A)
CAUTION:
ONCE THE KIT IS SNAPPED IN, IT
CANNOT BE REMOVED WITHOUT
DASH PANEL REMOVAL.
