8
Dash Disassembly
1.
Remove (2) 9/32” hex head screws
from the knee bolster panel.
2.
Pull down on the panel and
remove the 9/32” hex head screws
exposed on the bottom of the dash
trim bezel.
3.
Remove (1) Phillips screw above the
instrument cluster.
4.
Unclip the dash trim bezel
and remove. (Figure A)
5.
Remove (2) 9/32” hex head screws
securing the factory head unit and
disconnect the wiring.
Continue to tab instructions
Chevrolet Blazer
(with DDIN)
2002-2005, Chevrolet S-10
(with DDIN)
/GMC
Sonoma
(with DDIN)
2002-2004, Oldsmobile
Bravada 1998-2001
1.
Open drivers door and remove fuse
panel on end of dash.
2.
Open passenger door and remove
panel on end of dash.
3.
Remove (1) Phillips screw from each
side exposed.
4.
Remove (3) screws from top of glove
box liner.
5.
Remove (2) screws from the top-left
corner of the glove box cavity.
6.
Remove (1) Phillips screw from the
defroster duct.
7.
Remove the ductwork and (1)
Phillips screw exposed.
8.
Remove the dash pad and (3)
Phillips screws exposed at the top of
the radio trim bezel.
Continue to tab instructions
Chevrolet Cavalier
2000-2005
(Figure A)
1, 3
8
8
8
8
6, 7
4
4
4
5
2, 3
