386.257.1187
|
6
KIT ASSEMBLY
Note:
For steps 1 and 2, reference the
installation manual provided with the radio
for which hardware to use. The display
screen and radio chassis use two different
types of screws.
1.
Secure the display screen to the
radio
brackets
using (6) screws supplied with
the radio. (Figure A)
2.
Secure the radio chassis to the
radio
brackets
using (4) screws supplied with
the radio. (Figure B)
3.
Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
4.
Slide the radio assembly into the upper
dash, then secure using the factory
screws.
5.
Reassemble the dash in reverse order of
disassembly to complete the installation
(Figure A)
(Figure B)
Содержание 108-FD9B
Страница 7: ...REV 3 10 2020 INST108 FD9B 7 ...
