REV. 12/21/21 INST107-GM5B
15
15
STEERING WHEEL CONTROL SETTINGS
(CONT.)
Continued on the next page
Changing Radio Type
1.
If the LED flashes do not match the number of the aftermarket, radio, the radio will have to
be manually programmed.
2.
Three (3) seconds after turning the key on, press and hold the
Volume-Down
button on the
steering wheel until the L.E.D. in the interface turns a solid green.
3.
Release the Volume-Down button; the L.E.D. will go out indicating we are now in
Changing
Radio Type
mode.
4.
Refer to the Radio Legend to know how many flashes are required to reach the after-
market radio.
5.
Press and hold the
Volume-Up
button until the L.E.D. goes solid, and then release. Repeat
this step for the desired radio number you have selected.
6.
Once the desired radio number has been selected, press and hold the
Volume-Down
button
on the steering wheel until the L.E.D. goes solid. The L.E.D. will remain on for about (3)
seconds while it stores the new radio information.
7.
Once the L.E.D. goes off, the
Changing Radio Type
mode will then end. You can now test the
steering wheel controls.
Note:
If at any time the user fails to press any button for a period longer than (10) seconds,
this process will abort.
Note:
Refer to
L.E.D. Feedback Legend
for number of flashes, and for more information
regarding specific radios.
Flash Count Radio Legend
1. Eclipse (type 1)
2. Kenwood
3. Clarion (type 1)
4. Sony / Dual
5. JVC
6. Pioneer / Jensen
7. Alpine
8. Visteon
9. Valor
10. Clarion (type 2)
11. Metra OE
12. Eclipse (type 2)
13. LG
14. Parrot
15. XITE
16. Philips
17. TBA
18. JBL
19. Insane
20. Magnadyne
21. Boss
22. Axxera
23. Axxerra (type 2)
