Metos MG 1000M, Руководство пользователя

Страница: 4 / 12

3
21. This product is a Group 2 Class B ISM equipment.
The definition of Group 2 which contains all ISM
(Industrial, Scientific and Medical) equipment in
which radio-frequency energy is intentionally
generated and/or used in the form of
electromagnetic radiation for the treatment of
material, and spark erosion equipment. For Class
B equipment is equipment suitable for use in
domestic establishments and in establishments
directly connected to a low voltage power supply
network which supplies buildings used for
domestic purpose.
22. This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
23. Children should be supervised to ensure that they
do not play with the appliance.
INSTALLATION
1. Make sure that all the packing materials are
removed from the inside of the door.
2. WARNING: oven for any damage, such as
misaligned or bent door, damaged door seals and
sealing surface, broken or loose door hinges and
latches and dents inside the cavity or on the door.
If there is any damage, do not operate the oven and
contact qualified service personnel.
3. This microwave oven must be placed on a flat,
stable surface to hold its weight and the heaviest
food likely to be cooked in the oven.
4. Do not place the oven where heat, moisture, or
high humidity are generated, or near combustible
materials.
5. For correct operation, the oven must have
sufficient airflow. Allow 20cm of space above the
oven, 10cm at back and 5cm at both sides. Do not
cover or block any openings on the appliance. Do
not remove feet.
6. Make sure that the power supply cord is
undamaged and does not run under the oven or
over any hot or sharp surface.
GROUNDING INSTRUCTIONS
This appliance must be grounded. This oven is equipped
with a cord having a grounding wire with a grounding plug.
It must be plugged into a wall receptacle that is properly
installed and grounded. In the event of an electrical short
circuit, grounding reduces risk of electric shock by
providing an escape wire for the electric current. It is
recommended that a separate circuit serving only the oven
be provided. Using a high voltage is dangerous and may
result in a fire or other accident causing oven damage.
WARNING Improper use of the grounding plug can
result in a risk of electric shock.
Note
1. If you have any questions about the grounding or
electrical instructions, consult a qualified electrician or
service person.
2. Neither the manufacturer nor the dealer can accept
any liability for damage to the oven or personal injury
resulting from failure to observe the electrical connection
procedures.
The wires in this cable main are colored in accordance
with the following code:
Green and Yellow = EARTH
Blue = NEUTRAL
Brown = LIVE