Metos MBC-1000, Инструкция по установке и эксплуатации, Страница: 8 / 58

22.10.2018
Metos Refrigerator / Freezer MBC - MBF
6
|
5. Installation
5.1 General
The appliance should not be installed adjacent to a heat source. Do not place the ap-
pliance near ovens, bain-maries etc. The appliance is designed for operation in room
temperatures of +43 degrees, 60% humidity, tropical.. All cold appliances generate
heat while they are running. Because of this the installation should only be done in
places with adequate ventilation.
5.2 Transportation and storage
If possible, do not unpack the appliance until it has been moved near the installation
place. Avoid tilting.
If the appliance has been tilted sharply before start-up, it is necessary to wait for
at least 15 minutes before switching it on. This makes sure that the compressor oil
sets into place.
The appliance should always be stored indoors.
If the appliance has been stored in a place where the temperature of the cooling
unit has fallen below 0ºC, it should not be switched on until the temperature of the
cooling unit is at least +10ºC. Switching on the appliance with too low temperature
may cause malfunction of the compressor.
5.3 Unpacking the appliance
Unpack the appliance and check that it has not damaged during transportation. Re-
move the protective plastic film from the body and shelves.
5.4 Installation
Move the appliance to its place.
When lifting the appliance with the help of a mechanical device, make sure that the
base construction does not get damaged.
Adjust the appliance horizontally with adjustable legs. Use a bubble when necessary.
Recommended deviation from the horizontal plane is +-0,5 degrees. All legs should
touch the floor. This guarantees that the doors work properly. For adequate ventilation
it is recommended to have at least 50 mm free space around the appliance.