|
13
29.5.2015
METOS DELI
PLEASE READ THE MANUAL THOROUGHLY PRIOR TO EQUIPMENT SET-UP, OPERATION AND
MAINTENANCE
IMPORTANT SAFETY INSTRUCTIONS,READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
INSTALLATION
IMPORTANT! PLEASE READ BEFORE INSTALLATION
• If the unit has recently been transported. Please let unit stand still for a minimum of 24 hours before
plugging it in.
• Maker sure that there is proper ventilation around the unit in the where it will operate.
• Make sure all accessories are installed before plugging the unit in.
• Please read through the manual in its entirety.
CABINET LOCATION AND INSTALLATION GUIDELINES
• Unpacking
-The unit is delivered on a pallet and shrink-wrapped. Documentation is inserted into a clear pocket
located inside the unit. Carefully remove the protective plastic fi lm and cardboard from the unit exte-
rior and from the door opening surround making sure that any sharp instrument used does not cause
damage, plus remove any quality labels.
• Install the unit on strong and leveled surfaces
-unit may make unpleasant noises if surface is uneven
-unit may malfunction if surface is uneven
-If the fl oor is not fl at, please use something to make sure the base of this unit in horizontal level
• Install the unit in an indoor, well-ventilated area
-unit performs more effi ciently in a well-ventilated area
-for best performance, please maintain clearance of 100mm on the back of the unit, 50mm on the
top of the unit
-outdoor use may cause decrease effi ciency and damage to the unit
• Avoid installation in a high humidity and/or dusty area
-humidity could cause unit to rust and decrease effi ciency of the unit
-dust collected on condenser coil will cause unit to malfunction. Clean the condenser at least once a
month with a brush or clean cloth
• Select a location away from heat and moisture-generating equipment
-high ambient temperature will cause the compressor to overwork, leading to higher energy bills and
gradual breakdown of the unit
• The appliance shall not be exposed to rain
The cabinet must not be located in a chlo-
ride / acid-containing environment (swim-
ming-bath etc.) due to risk of corrosion.
CAUTION: PROBLEMS CAUSED BY
UNPROPER POSITION OF UNITS ARE
NOT COVERED BY WARRANTY
