Metos CGN/GNF660L1, Инструкция по установке и эксплуатации

Страница: 3 / 20

1.11.2102
3
1. General
Carefully read the instructions in this manual as they contain important information regarding
proper, efficient and safe installation, use and maintenance of the appliance.
Keep this manual in a safe place for eventual use by other operators of the appliance.
The installation of this appliance must be carried out in accordance with the manufacturer’s
instructions and following local regulations. The connection of the appliance to the electric
supply must be carried out by qualified persons only.
Persons using this appliance should be specifically trained in its operation.
Switch off the appliance in the case of failure or malfunction. Have the appliance serviced by
a technically qualified person authorized by the manufacturer and using original spare parts.
Before performing any cleaning or maintenance operation always turn off the appliance and
unplug it from the power supply.
Not complying with the intructions in this manual may put the safety of the appliance in
danger. The manufacturer declines all liability for any operation performed on the machine
in disregard of the instructions provided in this manual
1.1 Intended use
The appliance shall only be used for storing food and beverages. The manufacturer is not
responsible for the consequences if the appliance is used for other purposes.
Do not store food in direct contact with the structure.
Both the appliance’s construction features and the condensing unit’s capacity have been de-
signed to store only pre-cooled/deep-fozen products. Never place carbonated beverages into
the low-temperature compartment as they may explode. Never place liquids or hot food into
the appliance and do not fill lidded containers to the top.
In all appliances there are surfaces subject to frosting. The appliance is equipped with automatic
defrosting, perform manual defrosting when needed. Never attempt to remove frost using a
pointed object because in this way you could irreparably damage the appliance.
Do not use any mechanical device or other artificial means to accelerate the defrost process.
The Manufacturer declines all responsibility, and the warranty shall be null and void, if electrical
and/or mechanical alterations are made to the product.
1.2 Controls at reception
Unpack the appliance immediately on receipt to check that no pieces have been lost or damaged
in transit.Inform the carrier of any damage at once.
1.3 Handling
HANDLING with FORK LIFT or SIMILAR
Before handling operations ensure that the lifting capacity is sufficient for tha appliance in
question. Begin lifting checking that the appliance is in stable equilibrium.
Do not tip or turnover the appliance during handling.
Wait at least 2 hours before turning on the appliance if it had to be transported horizontaly.