Metos BETA BN 300, Инструкция по установке и эксплуатации

Страница: 8 / 16

19.7.2004 Rev. 2.0
Safety
2
2. Safety
2.1 Safe use of the appliance
All operators involved in the present machine use, in installation, maintenance and serv-
icing, must be skilled enough and must read this use manual carefully.
It is important that not qualified persons or children do not use, even by chance, this ma-
chine.
An operator must take care of cutting and electric danger: the machine has a sharp blade
driven by electric motor.
The place of work must be cleaned and tided up; do not place knives, rags or other things
under the machine base.
Machine noise is, in every phase of its use, lower than 70 dB.
Anyone who uses this machine must wear close-fitting and clean dresses according to hy-
gienic rules.
When blade maintenance and cleaning are carried out, it is important to use wrist protec-
tion gloves.
Machine has safety devices: blade ring-guard safeguards blade rim along all the circle
part which is not used to cut; food-pusher, platform guard, thumb protection, knob restrict
contact risk with blade near the cutting area.
All voltaged parts are insulated.
NVR breaker (for machines with CE approval only) when operated it turns the machine
off. It does not allow unintentional starting when normal electric feeding is put back after
a breaking off.
Daily check before starting work, or after a maintenance intervention that all safety devic-
es are working right. Periodically check feeding cable integrity.
In case of danger switch off the machine by acting on the switch and disconnect plug.
Periodically check feeding cable integrity.
It is forbidden taking off, changing or making useless safety devices.