METIS Systems S.r.l. -
EDS GAMMA Supported Digital Cameras v2.90d
Pg.7
Integrated Power Supplies overview
One (1) power supply and related cable/connector is provided with each EDS system. The
customer is responsible for requesting to METIS (at ordering time) the specific power supply
according to the digital camera model that is intended to use in the EDS system:
NOTES:
•
EDS Power supplies (for all cameras) must be connected to a suitable power source
(100-240VAC 50-60hz) by preference through a multi plug power strip. Power supplies
cables are arranged as described in the following pages of this manual.
•
If the power cables (as seen in the previous picture) is not compatible with the kind of
power socket available in your country, you must provide a suitable replacement.
1- Canon EOS 800/850D:
The Canon 800/850D power supply is coupled with a battery adapter that must be plugged
into the camera instead of the battery. The external power supply for the Canon 800/850D
camera, if purchased by the customer, can be ordered using the following Canon codes:
As a standalone Kit including all parts:
•
ACK-E18 power adapter kit (include AC-E6 power supply and DR-E18 battery
adapter)
Or in 2 separate parts:
•
AC-E6 Power Supply
•
DR-E18 (DC Coupler) battery adapter
This kit consist can be provided by METIS (on request); the AC-E6 power supply must be
placed into the “electronic compartment” of the EDS GAMMA system while the DR-E18
battery adapter must be inserted in the battery compartment of the camera
The power supply has the following electrical specifications:
•
AC INPUT - 100-240VAC 50-60hz
•
DC Output 8.0V 3A
