R35mm ( 1
3/8
”) Min.
20mm
(
13/16
”)
DO NOT CRUSH
HOSE OR
SWAGED ENDS
DO NOT STRETCH OR TWIST HOSES
CORRECT
INCORRECT
All pipework must be thoroughly flushed prior to the installation of the mixer. Inline
filters must be fitted on both hot and cold supplies to prevent foreign particles damaging
the ceramic cartridge.
IMPORTANT
Please read all of the instructions before installation
This faucet is designed for equal and unequal pressure systems.
This mixer is not recommended for use in uncontrolled heating systems such as
wetbacks or solar heater units.
32 - 42
(1
1/4” -
1
5/8”
)
40 max
(1
9/16”
)
M5 Grubscrew
Stream shaper
Body Assembly
O-ring
Handle plate
Lock nut
Handle
Mounting nuts
Mounting plate
Mounting gasket
O-ring
Base ring
Cold
Hot
Mounting stud
Inlet
Hot
Cold
2.5mm Allen key