THE METHVEN GUARANTEE
The warranty statement shall apply to all tapware & showers supplied by Methven
For more information visit www.methven.com
THIS WARRANTY ISSUED BY: Methven Australia Pty Ltd, Melbourne Australia
Technical Specification
Inlet Connections:
All 1/2" BSP
Operating Pressure:
150kPa - 500kPa
For optimum performance hot and cold water pressures should be equal.
AS/NZS 3500 stipulates a 500kPa maximum operating pressure at any outlet
within a building. Where normal pressure exceeds 500kPa, a pressure limiting
valve must be installed.
This basin mixer set is rated at 7.5l/m. If limited water flow is experienced, locate
stream shaper flow restricting device and filter washers and clean away
foreign material as required.
Operating Temperature:
Recommended hot water supply 50°C, maximum 70°C. AS/NZS 3500 requires all
hot water supplies to any sanitary fitting to be tempered to 50°C.
Ceramic cartridges:
Warranty claims will be void where the ceramic head works has malfunctioned due
to the presence of the following within the water supply:
Copper tube pieces
Plastic pieces
Sand, dirt or stones
Thread tape
Other objects not normally present in the potable water supplies
www.methven.com
Customer Care Hotline: 1300 METHVEN (638 483)
Email: [email protected]
1
2
3
4
7
5
11
13
12
Hot
Grub screw
& cap
Cold
Body assembly
O-ring
Mounting
gasket
Mounting
plate
Push fit inlet connector
(bath only)
Base ring
O-ring
Stream shaper
(ASDA)
T-piece
2.5mm hex key
Spout
Handle
Handle plate
1/2” BSP
Lock nut
Product Components
Please check every component in accordance
with the table below
No. Item description
Qty supplied
1
Spout
1
2
Push fit inlet connector (bath only)
1
3
Base ring (spout)
1
4
O-ring
3
5
1/2" BSP
1
6
Mounting gasket
1
7
Mounting plate
1
8
Handle with grub screw & cap
2
9
Lock nut
2
10 Half dome/handle plate
2
11
Body assembly
1
12 2.5mm hex key
1
13 T-piece
1
6
8
9
10
4
04-9905
Hot 04-9752
Standard Spindle &
Handle Assembly Set Up
Spindle Handle
Extension 04-9837
Spindle Flange M x F
Extension 04-9875
SPARE PARTS
(NOT INCLUDED)
(NOT INCLUDED)
(NOT INCLUDED)
Cold 04-9769
Handle Parts / Assembly
Care and Cleaning
Never use abrasives to clean this
product. Clean regularly with
contamination free warm soapy
water and a damp soft cloth.
Damage caused by using unsuitable
cleaning agents is not covered by
warranty.
MA018284 Waipori 3 Hole Hob Mounted Set AU.indd 2
2/05/12 2:33 PM