background image

10 

9.

Safety 

With power applied, the tip temperature can be > 300°C. Failure to observe the following 
precautions may lead to injury to users or damage the equipment: 

Do not touch any metallic parts of the hand-piece

Do not use near flammable items

Do not use unit for any function other than described in this manual

Use only genuine Metcal replacement parts

Use in a well ventilated area or with fume extraction

Do not use the equipment with wet hands

Connect only to properly grounded outlets to prevent risk of electric shock.

Always  place  hand-piece  back  into  the  work  stand  to  prevent  accidental
burning of oneself or surrounding objects.

This  appliance  is  not  intended  for  use  by  persons  (including  children)  with
reduced  physical,  sensory  or  mental  capabilities,  or  lack  of  experience  and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.

Children  should  be  supervised  to  ensure  that  they  do  not  play  with  the
appliance.

Although  the  systems  offer  superior  EOS  (Electrical  Overstress)  protection,  periodic 
checks  of  the  instrument  cord  should  be  incorporated  into  standard  operator 
maintenance procedures. 

Waste Electrical and Electronic Equipment Directive - WEEE (2002/96/EC). 

When  this  product  is  no  longer  required,  if  it  cannot  be  re-used, 
we ask our customers not to dispose of it as unsorted municipal 
waste but to appropriately recycle the product.

WARNING

!

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

 TestEquipmentDepot.com 

Содержание MX-500S












Отзывы: