manualshive.com logo in svg

Metaxas Audio Systems Ikarus, Руководство пользователя

Поделиться
Скачать
Metaxas Audio Systems Ikarus Скачать руководство пользователя страница 13

K O S T A S

M E T A X A S   D E S I G N

O p e r a t i n g   I n s t r u c t i o n s

11

Steps for Connection

1. Ensure that the ON/OFF switch on the back panel is in the OFF position before 
connecting the amplifier into your system.

2. Once connected, ensure that there are no 'short circuits' in the speaker wires, then 
proceed to switch the unit ON.

Note: For the best results, it is recommended that the unit is powered on for at least 15
minutes before critical listening is attempted.

OPTIONAL PHONO STAGE - This needs to be installed BEFORE you take delivery of your
amplifier. Please refer to the additional Instructions that come with the PHONO STAGE.

Protection Circuits

The output stage of the amplifier is fused with +/- 2A fast blow fuses [M205 type] which 
protects the amplifier in case of operating faults. The low value of fuse inherently 
protects the following loudspeakers without the need for adding an OUTPUT RELAY.

Mains Fuse

A 2AMP SLOW BLOW DA205 Type fuse is located on the AC MAINS SOCKET. If this blows,
simply replace with the same rating fuse. If the fuse continues to blow, please refer to the
Maintenance Section of this manual for further instructions.

Serviceability

The complete active circuitry of the Iraklis including primary filtering capacitors are all
mounted to the large single ground P.C.B. Easy access to the board is maintained by simply
removing the base to gain access to the 'component side' to change a blown fuse.

Содержание Ikarus























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды