Revision 1.0
September 09,2011
MetaWatch_Analog_WDS112_Getting_Started_1.0
15 of 21
2.6.2
Pairing using Android Wireless Settings
Go to the Bluetooth Settings area of your phone (Often found in: Settings->Wireless and Networks->Bluetooth
Settings). Make sure that you Bluetooth radio is turned ON and that the watch has Bluetooth and Discoverable
modes ON. Press “Scan for Devices” on your phone, if you can not see the watch, you may need to move to a less
radio noisy environment and try again.
Once you see the watch in the list of discoverable devices, simply tap on the watch’s name, if the watch had not
been paired previously, then a pairing request will be displayed either as a pop-up menu or as an item in the
notification bar. The pairing code (for non-SSP mode) is four zeros. Enter “0000” with no quotes. The pairing
should complete.
Once paired, open the Meta Watch Manager application. Now this application needs to know which watch you want
to use, so go to “Menu->Settings->Select Watch”. A list of devices will be displayed, select your watch from that
list.
**Bug Note: Currently, this “Select Watch” menu only displays discoverable devices. Meta Watch turns
it’s discoverable mode OFF automatically once paired. This causes the watch to not show up in this menu
when paired by this method. The work around is to manually turn the Discoverable Mode ON using the
watch Menu and then “Select Watch. Or you can use the Meta Watch Manager for Android pairing
instructions instead. Or you can enter the watch’s MAC (also called BDA which stands for Bluetooth
Device Address) by using the “MAC” button instead.
This saves the watch address. You can see the saved watch address by touching “MAC”, careful not to change this
address on accident. Next go “Back” and hit “Menu->Start”. The MetaWatch service will attempt to connect and the
MetaWatch Manager will finish establishing the connection to the watch.
2.7
W
ATCH
UI
WITH
P
AIRED
D
EVICE
METAWATCH
QR code
Watch status
screen
List Paired
Devices
Turn on LED
(All modes)
A
B
C
F
E
D
Toggle Seconds
ON/OFF
Menu mode