Setting the Tally / Contact Closure Jumpers
Each output has two jumpers that set whether the contact
closure or Intercom pass-through is active for that output
The jumpers are clearly labeled, just be sure to move
both jumpers if you need to make any changes. Improper
jumper settings may damage the TLC-6, tally lights or
connected intercom equipment.
See
Appendix A
for general jumper instructions.
All six outputs set to Intercom
Pass Through
(This is how the TLC-6 ships)
All six outputs set to Contact
Closure
Outputs 1, 2,3 and 6 set to
Contact Closure
Outputs 4 and 5 set to
Intercom Pass Through
Outputs 4 and 5 set incorrectly, equipment damage may occur.
