MetalMaster SHST-1.2HO, Руководство по эксплуатации

Страница: 9 / 20

9
OPERATION MANUAL
2.2 SPECIFIC SAFETY FOR SHRINKER STRETCHERS
DO NOT use this machine unless you have been instructed in its safe use
and operation and have read and understood this manual.
Safety glasses must be worn at
all times in work areas.
Close fitting protective clothing or
overalls are encouraged
Appropriate protective footwear
with substantial uppers must be
worn.
Rings and jewelery must NOT be
worn in the workshop
PRE-OPERATIONAL SAFETY CHECKS
1. Ensure you are familiar with the operation of the Shrinker Stretcher
2. Check for any damage or parts missing
3. The area around the machine must be clean and free of trip hazards.
4. Any forming die must be inspected for safe use i.e. no cracks.
5. Ensure safety glasses or goggles are available and are worn by all persons in the vicinity.
6. Any test piece, project or material (work piece) to be worked must be of an appropriate
thickness and safe to use on this equipment.
7. Faulty equipment must not be used. Immediately check suspect machinery.
OPERATIONAL SAFETY CHECKS
1. Place your test piece, project or material (work piece) securely between the top and bottom
jaws
2. Do not over reach. Maintain a balanced stance at all times, so that you do not fall or lean
against the machine.
3. Use the Shrinker Stretcher pedal, in a pumping action, to slowly work the material.
4. Keep hands and fingers away from jaws.
5. Wear leather gloves when handling the work piece.
6. Use the right tool. Do not force a jaw set to do a job that it was not designed to do.
7. Give your work undivided attention. Looking around, carrying on a conversation and
“horseplay” are careless acts that can result in serious injury
8. DO NOT apply excessive force to the Shrinker Stretcher.
AFTER OPERATION COMPLETED
1. After use, clean the machine down and place any tools and equipment in the appropriate
storage area.
2. Place all scrap or waste in the appropriate bin.
POTENTIAL HAZARDS

Beware of high forces applied

Eye injuries – flying or shattering objects

Pinch and squash

Laceration injuries
Gloves should be worn when
handling the work piece
Ear protection should be used in
loud and noisy conditions