Metallkraft RBM 305, Руководство по эксплуатации

Страница: 9 / 18

Operation
RBM 305 | Version 2.02 9
The machine is designed for steel processing and not for
processing flammable or harmful substances. The custo
-
mer is responsible for the choice of the material to be
processed.
It must also be ensured that the safety of nearby opera
-
ting personnel is ensured.
The material should meet the following requirements:
- Dry and clean, free of oil.
- The diameter must correspond to the specificati
-
ons.
- The material should have a degree of hardness th
-
roughout.
- Buying high quality material is advisable
- The surface of the areas to be bent should be
smooth.
A complete bend with one pass is not possible. To get
the desired radius, several passes are required. Tighter
bends and full radii always require several passes.
In order to be able to remove a bent workpiece from the
machine, the locking handle of the upper roller must be
released and the upper roller must be removed from the
guide.
Fig. 5: Locking uper roll
8.1 Work flow
Step 1: Before starting the machine, check the locking of
the top roller.
Step 2: Check the parallelism of the rollers with a gauge
and a spirit level.
Fig. 6: Check parallelism of rollers
Step 3: Clean the rollers and the workpiece.
Step 4: Perform Bending.
Step 5: Loosen the lock of the upper roller, fold out the
upper roller and remove the workpiece.
Step 6: Fold in the top roller and lock.
8.2 Setting the sheet thickness
The sheet thickness is set via the two rotary handles (1).
By unscrewing the gap between roller 1 and 2 roll increa
-
ses, by screwing it decreases this. It is advantageous to
insert the sheet only to then adjust the distance between
the two rollers so that they rest against the sheet.
NOTE!
- The safety devices as well as the protective covers
must be functional.
NOTE!
It is important to thoroughly clean the rollers to avoid
possible slippage of the profile due to grease resi
-
dues on the rollers.
Wearing safety gloves!
Wear safety shoes!
Wear protective clothing!
DANGER!
The unfolded top roller must not be overloaded by
the workpiece.
Locking