Metallkraft 3776102, Инструкция по эксплуатации

Страница: 5 / 10

Intended Use
SSG 12 | Version 2.02 5
Electrically qualified person:
Electrically qualified person is due to their professional
training, knowledge and experience as well as knowl-
edge of the relevant standards and regulations, in a po-
sition to carry out work on the electrical systems and to
independently recognize and avoid possible dangers.
Qualified personnel:
Due to their professional training, knowledge and expe-ri
-
ence as well as their knowledge of relevant regulations the
specialist staff is able to perform the assigned tasks and to
recognize and avoid any possible dangers them-selves.
Manufacturer:
Certain works may only be performed by specialist per-
sonnel of the manufacturer. Other personnel is not au-
thorized to perform these works. Please contact our cus-
tomer service for the execution of all arising work.
2.4 Personal protective equipment
The personal protective equipment serves to protect per
-
sons against impairments of safety and health while wor
-
king. The staff member has to wear personal protec-tive
equipment while performing different tasks on and with
the machine which are indicated in the individual para
-
graphs of these instructions. The personal protective
equipment is explained in the following paragraph:
3 Intended Use
The Compressing and stretching machine is used for
universal use in the workshop and construction site area
for upsetting and stretching sheet metal. The version
SSG 12 can handle a maximum sheet thickness of 1.2
mm
Proper use also includes compliance with all information
in this manual. Any use beyond the intended use or
otherwise is considered misuse.
Unauthorized modifications or alterations to the com
-
pression and stretching device can invalidate the CE
conformity of the compression and extension device and
are prohibited. The company Stürmer Maschinen GmbH
assumes no liability for design and technical changes to
the Compressing and stretching machine.
The improper use of the compression and stretching de
-
vice as well as the disregard of the safety regulations or
the operating instructions exclude a liability of the manu
-
facturer for resulting damage to persons or objects and
cause the warranty to expire!
3.1 Residual risks
Even if all safety regulations are observed and the ma
-
chine is used correctly, there are still residual risks listed
below:
- Pinching of body parts.
- Injuries from flying workpieces or workpiece parts.
- Danger of breakage of the tool.
Ear and head protection
The ear protection protects against hearing damage
caused by noise. The industrial helmet protects the
head against falling objects and bumping against
fixed objects.
Face protection
The face shield protects the face from flying parts.
Protective gloves
The protective gloves serve to protect the hands
against sharp components as well as against fric-
tion, abrasions or deep injuries.
Safety boots
Safety boots protect the feet from being crushed, fal
-
ling parts and slipping over on slippery ground.
Protective clothes
Protective clothes are made of a tightly fitted fabric
without the protruding parts of low tear strength.
WARNING!
Danger in case of misuse!
Misuse of the device can lead to dangerous situati-
ons.
- Only operate the device in the power range speci-
fied in the technical data.
- Never bypass or override the safety devices.
- Only operate the device in a technically perfect con
-
dition.