OPERATING INSTRUCTIONS
Head Assembly:
STEP1:Unscrew the 4 lock screw on the face of the fan housing, handle the rear
grill to the motor housing by matching its 4 screw hole to the 4 screw hole on the
front motor housing, then screw the lock screw to lock the rear grill and the front
motor housing.
STEP2:Insert the motor shaft into the fan blade by matching the motor shaft
spindle to the D-shaped cut-out on fan blade, then screw the lock screw.
STEP3:Center the front grill, aligning the logo, so it is horizontal and parallel to
the floor, place onto the rear grill, and snap in place. Secure by tightening the grill
button screw at the bottom of the rear grill.
Pole Assembly:
Unscrew the screw in locking shaft at the bottom of fan housing, insert upper
extension pole to the locking shaft with the right hole position
。
Using the screws to screw down leg with the base of support tube.
MAINTENANCE
1.
Always unplug the fan before cleaning or disassembling.
2.
Do not allow water to drip on or enter into the fan housing.
3.
Be sure to use a soft cloth moistened with a mild soap solution.
4.
Do not use any of the following as a cleaner: gasoline, thinner, or benzine.
TECHNICAL DATA
Rated Input Voltage: 220-240V
Rated Input Frequency: 50Hz
Rated Power: 110W
