Metal Samples MS2701E, Руководство оператора, Страница: 5 / 25

3
C. Technical Specifications
Model MS2701E High Resolution ER RS-485 Modbus Transmitter
Physical Data
Instrument Weight: 3.70 lb. (1.68 Kg)
Total Weight w/ Accessories: 5.76 lb. (2.61 Kg)
Instrument Dimensions: 8.0"H x 4.82"W x 3.45”D
(20.32cm H x 12.24cm W x 8.76”D)
Operating Temperature: -4° to 158°F (-20° to 70°C)
Storage Temperature: -40° to 176°F (-40° to 80°C)
Enclosure Material: Cast Aluminum (Copper-Free)
Mounting Specifications: Direct probe mount or
Remote mount
(Up to a 2.5” (6.35cm) Dia. pole)
Performance Data
Measurement Type: ER measurement
Range: 0-100% of probe life
Resolution: 0.0015% of Probe Life (16-bit)
Cycle Time: 75 Seconds
Electrical Data
Power Requirements: 10 to 28 VDC
Maximum Probe Cable Distance: 30 ft (9.1 m)
Output Specifications: RS-485 Modbus, RTU or ASCII Protocol (Switch Selectable)
2400 / 4800 / 9600 / 19.2K Selectable Baud
32 Maximum Units (Addresses 1 to 32)
Hazardous Location Certifications – Transmitter
USA / Canada
Conforms to ANSI/UL Std. 60079-0, 60079-11, 61010-1
CAN/CSA Std. E66079-0, 60079-11 & CAN/CSA C22.2 No. 61010-1
For Stand-Alone Use For Multi-Drop Use
Class I, Zone 1, AEx ia d IIC T4 Gb Class I, Zone 1, AEx ia d IIB T4 Gb
Zone 20, AEx ia d IIIC T130° C Da Zone 20, AEx ia d IIIB T130° C Da
-20° C ≤ Ta ≤ +70° C -20° C ≤ Ta ≤ +70° C
Europe and Worldwide
For Stand-Alone Use For Multi-Drop Use
(ATEX and IECEx)
II 1/2 G Ex ia d IIC T4 Gb II 1/2 G Ex ia d IIB T4 Gb
II 1/2 D Ex ia d IIIC T130°C Da II 1/2 D Ex ia d IIIB T130°C Da
- 20°C ≤ Ta ≤ + 70°C - 20°C ≤ Ta ≤ + 70°C
ATEX Certificate No: ITS14ATEX28092X
IECEx Certificate No: IECEx ITS 14.0052X
X - see Special Conditions (page 7)
Hazardous Location Certifications – Enclosure
Case Specifications: Explosion Proof (FM, CSA, CENELEC, UL)
IP 66, NEMA 4X, 7BCD, 9EFG
Included Accessories (Direct-Mount Model)
Meter Prover, Operations Manual
Included Accessories (Remote-Mount Model)
Meter Prover, Operations Manual, Probe Cable, Mounting Hardware Kit
Recommended Accessories
RS-485 Isolating Power Supply (Metal Samples Part # ET1548)
RS-485 Isolating Signal Repeater (Metal Samples Part # ET1549)
4.82”W
(12.24cm)
8.0”H
(20.32cm)
Figure 1. Overall Dimensions
3.45”D
(8.76cm)