METAL PLESS PLOWMAXX PLBH 0736-13 Скачать руководство пользователя страница 7

PLOWMAXX

4

WARRANTY POLICY 
on new METAL PLESS equipment.

METAL PLESS offers a warranty on all new equipment for a period of 1 year after date of retail 

purchase.

AN APPROVAL FROM METAL PLESS IS REQUIRED BEFORE ANY REPAIRS OR WARRANTY 

CLAIMS. PHOTOS AS WELL AS THE SERIAL NUMBER WILL BE REQUIRED.

Parts are F.O.B. Plessisville, QC.

All defective parts must be returned to METAL PLESS within a period of 30 days and follow our 

mandatory procedures for returning parts.

The METAL PLESS warranty covers all defects in material or fabrication of the products only, 

and therefore does not cover the normal wear or non-recommended utilization of the product. 

Damage resulting from an accident or abusive use will not be covered by the warranty policy.

The warranty does not cover any traveling fees/expenses to access the equipment for evaluation 

or repairs.

Only original parts or METAL PLESS approved parts will be considered appropriate for warranty 

claims.

METAL PLESS reserves the right to refuse or modify any labor time deemed excessive for any 

repair work claimed on warranty.

The paint standard for all replacement parts out of the factory will be standard Metal Pless color.

The warranty policy does not apply to the NORMAL WEAR PARTS. Examples listed below.

Examples: Cutting edges, Wear shoes, Abrasion shoes, Curb runners, Impact Guards, Tire 

Savers, Couplers, Hydraulic Hoses, Coils, Solenoids, etc.

PURCHASER’S RESPONSIBILITIES
The present warranty presumes a correct maintenance and periodic inspections of the 

equipment by the owner, as described in the Owner’s Manual provided with the equipment at 

time of purchase. The cost of regular maintenance or required servicing is the responsibility of 

the client. 

The buyer must conserve all receipts proving that the required maintenance has been respected.

EXCLUSIONS ON SUBSEQUENT MANUFACTURER UPGRADES
METAL PLESS reserves the right to modify, change or improve any product with no obligation to 

replace or modify any previously purchased equipment.

1.

2.

3.

4.

5.

6.

7.

8.

9.

1 819 362.2221   

1 866 362.1688

1683, boulevard des Sucreries

Plessisville, Québec (CANADA), G6L 1W4

metalpless.com 

[email protected]

3. WARRANTY POLICY

Содержание PLOWMAXX PLBH 0736-13

























Отзывы: