2
METAL MAN
Operating Instructions and Parts Manual
ARC 200
Know your Welder
ON/OFF Switch
In the “off” position no power is being supplied to the electrode holder. In the
“ON” position power is supplied to the main transformer and control circuit
Indicator Lights
There are two indicator lights: 1) Power and 2) Thermal Overload. When the
machine is turned on, the power indicator will be on. When the thermal overload
indictor is on, it indicates the machine is has exceeded the duty cycle and the
internal temperature is too high. The machine will turn off automatically but the
fan will remain on to cool down the internal components. When the internal
temperature has decreased, the machine will turn on automatically.
Ground Cable and Clamp
The ground cable and clamp are attached to the work piece to complete the flow
of current needed to weld.
Welding Cable and Electrode Holder
One end of the cable is connected to output connector of the welder. The
electrode is held in the electrode holder for welding.
Current Adjustment
Current adjustment is on the front panel of machine. It has infinite current output
adjustment from 60 to 180 amps.
Power Cord
The power cord connects the welder to the 230 volt power supply. A 50 amp plug is
supplied.
ON/OFF switch
Indicator lights
Ground cable and
clamp
Welding cable and
electrode holder
Current
adjustment
