background image

13.

DYNAMIC 2500 & 3500

GENERAL MAINTENANCE & INFORMATION

(IMPORTANT: READ THIS PAGE)

FIRE  BRICKS: 

The  fire  bricks  are  made  of  high  grade  refractory  mortar  which  will  give  good  life  if 

maintained by rendering periodically with fire cement.

SURFACE FINISH:

 Due to the hard working nature and high temperature of the boiler the painted surface 

will wear with use. This is normal and will need to be retouched from time to time.

To clean wipe with a damp cloth. When stains become unsightly repaint affected area. The boilers surface 

will need to be cool and clean. Remove any loose material.

The new paint will cure and harden when the boiler reaches good working temperatures.

WARNING:

 Consult  a  qualified  installer  in  regards  to  the  installation  of  any  hydronic  central  heating 

system. Failure to do so could result in injury to person or property.

OPERATING HINTS

*  Always open damper control on boiler before refuelling.

*  Rake  grate  and  clean  ashpan  out  regularly.  (Ash  rake  and  combined  spin  wheel  and  ashpan  tool 

provided).

*  Avoid wet or green wood – these will cause maintenance problems in any stove or boiler.

*  Briquettes or coal may be used and will give good overnight operating temperatures.

*  Check and clean flues and smokeways at least every 12 months.

*  A  hot  fire  burning  slowly  produces  little  or  no  smoke.  A  cold  fire  smouldering  produces  maximum 

smoke.

*  Condensation may form in the fire box or ashpan area when the boiler is first lit or is cold. This will 

evaporate as the boiler warms. The condensation may be quite pronounced.

**  Check rust inhibitor every 6 months or after any major boiling or water loss. The boiler is 

made of mild steel and will give years of trouble free operation providing anti-rust and if 

required  hardness  conditioner  levels  are  maintained.  If  water  supply  is  acidic  add  sodium 

bicarbonate (cooking soda) - ask your dealer.

Thermalux “Thermablend” long life rust inhibitor available from the manufacturer or dealer.

WARNING

HYDRONIC CENTRAL HEATING 

(IMPORTANT: READ THIS PAGE)

For information on or the supply and installation of  Hydronic Central Heating components to suit your 

home and your requirements, and to ensure you comply with relevant building requirements, consult your 

local Thermalux dealer or a qualified, experienced installer.

Failure to correctly install a Hydronic Central Heating System could result in injury to person or property.

Happy Heating from all at Thermalux.

Manufacturers of High Quality Solid Fuel Appliances

Содержание CD series





















Отзывы: