13
F
Use the Remote Controller (IF EQUIPPED)
• Leave the remote controller idling for about 10 seconds, it will shut down
automatically.
• Rebuild connection when you replace the batteries of the remote controller.
Attach the batteries of controller
Lift the battery compartment door on the back of the controller and insert two
AAA(LR03) batteries.
HINT: Batteries not included. Refer to the Battery Information on the page 1.
NOTE:
1. Build connection
Long press the forward and reverse buttons for 3 seconds, and the speed
indicator flashes. Then power on the vehicle, the speed indicator goes to long
bright, means the connection successful. If the speed indicator no response,
means the connection failed. Replace the batteries and retry.
2. Brake button
Press the button to stop the vehicle, press it again to release the brake.
3. Speed select button
The switch operates the vehicle to move in low, normal or high speed.
HINT: This switch won’t work while your vehicle moves reverse.
Speed select button
Speed indicator
Forward button
Reverse button
Left button
Brake button
Right button